1,Put the products into red/black connection hole in series or by parallel connection;

2,Connecting a 220 V alternate current directly.

3,Checking 1-2 firing systems to see if it¡¯s connected, you need connect products in series, the indicator shows bright that means connect well.(Un-auto systems need press the ¡°TEST¡± button;

If connecting products is parallel connection, it¡¯s need to test separate by oneself. The test way is the same as in series. See it¡¯s connect well, press corresponding ignite button on itself or telecontrol .

4.If it¡¯s the 4 groups or upwards firing system, Place the switch on ¡±TEST¡± position, if the exterior product in series, press the corresponding button (or press the corresponding button of control) to light fire. It indicate that is connect well if the indicator shows bright.; It should to test each items if the exterior products are parallel connection.(test way is the same as in series)

After testing is well-balanced, Put the TEST switch on 'fire' position, press the corresponding button (or press the corresponding button of control) to light fire .

 

1,Please don¡¯t make it to be short circuit for that would damage machine.

2.If connecting products in series, Because the resistivity of ignition dissimilarity from different factory , please use the products which made by the same factory;

3.They would affect each group¡¯s ignite quantity directly for the differences is existed in different products ignite, the thickness of lines, and the distance of circuitry;

4. Please turn off the power switch when the circuit connecting but no need use it , and notice to

Do not shake machine violently;

5. Don¡¯t press ¡°FIRE¡± after pull out electrical outlet, for there is left power would ignite products;

6.Please don¡¯t place the product in the damp , sour ,alkali and pollution environment.